Velo Mine
White Industries Eno Eccentric hub Black Mavic Open Pro wheel
White Industries Eno Eccentric hub Black Mavic Open Pro wheel
Couldn't load pickup availability
White Industries Eno Eccentric hub Black Mavic Open Pro wheel
New Hand Built Trued and Tensioned
Mavic Open Pro 32 Hole black Rim
White Industries Eric's Eccentric ENO 32 Hole black hub allows chain tensioning on a vertical dropout frame road bike-Great to convert a road bike to single speed without the complexity of a separate chain tensioner!
Fixed/Freewheel (Flip/Flop) hub
Fixed gear riding REQUIRES the White industries specific track cog for fixed gear use & standard English threaded lockring (lockring not included)
Standard English threading for freewheel use. We also carry the White Industries ENO freewheels-a very high quality freewheel!
Sapim Race Double Butted 1.8/2.0mm 14/15 Gauge black Spokes
Sapim Black Brass Nipples
700c Clincher
1040 grams
130mm Rear Spacing, fits most modern road bikes
Check below the images for more info about the Eno Hub.
Here is our link to our freewheel page:
http://old.velomine.com/index.php?main_page=index&cPath=87_228
Here is our link to the fixed cogs:
http://old.velomine.com/index.php?main_page=index&cPath=87_197_343Velo Mine customer service phone 217.679.2356 - 217.827.1173 - email ben@velomine.com
|
Our Eccentric ENO line of hubs are made specifically for bikes with vertical dropouts. The majority of bicycle frames made today are made with vertical dropouts, however, converting the frame to a single speed presents the problem of how to tension the chain. Chain tension with vertical frames can be addressed three ways: by using a chain tensioner, using an eccentric bottom bracket, or with our Eccentric ENO. The Eccentric ENO is an easy, clean, and simple answer to the problem. The eccentric rear hub allows the rider to adjust the chain tension by simply rotating the elliptical axle ends up and back in the dropouts. As the hub rotates back, the chain is pulled into tension. The Eccentric ENO is available in two models: The Eric's Eccentric ENO and Eccentric Disc ENO. The Eric's Eccentric ENO is a flip/flop design fixed/free. The disc model has an ISO standard six bolt rotor on the non-drive side and is freewheel compatible on the drive side. Made in the USA.
|
|